An ididit steering column is capped off with a one-off custom-brushed aluminum steering wh
Conundrum's 510 hp comes from a '91 Corvette LT5 350ci engine. A pair of factory Corvette ZR1 headers flow into a custom-made set of polished stainless steel exhaust. A custom fabricated air intake inhales air that is directed from the massive grille opening. The secret to changing the LT5 ugly duckling into a beautiful swan was Danny Barnett's attention to detail and surface finishes. An LT6 Tremec six-speed manual transmission was extracted from an '00 C5 Corvette. Danny Barnett went through the LT6 Tremec six-speed transmission to make sure it was in optimum operating order.
Every piece of sheetmetal was cut, massaged, and reshaped to sustain the 3100 series DNA. This incredible metal sculpture was formed by the hands of Eric Peratt at Pinkee's Rod Shop in Windsor, Colorado. The entire '48 Chevy five-window image was chopped, sectioned, and pancaked to maintain its perfect, proportional identity. The custom grille was created using a 1/8-inch thick aluminum plate that was dimple-holed and a pair of aluminum spheres, flanked by a polished aluminum horizontal bar. The front fenders and headlight cavities were reconfigured and shaped to house the Jeep Liberty headlights. A mild front bumper was blended into the lower leading edge. The top surface was wedged 2-1/2 inches at the center of the roof, then tapered to 2 inches at the A-pillars.
The cab was chopped 2 inches, while the '48 two-piece windshield was carefully extracted, a '96 Ford Ranger one-piece windshield was grafted into the A-pillars, roof, and cowl. The hood was pancaked, then pie-cut, due to the 2-inch section of the cab and doors. Linking the front and rear fenders is a pair of custom smooth running boards. A lower-profile custom-built bed and tailgate was constructed from 16-gauge sheetmetal, the stock rear fenders were widened 1 inch, then cut down, and reshaped. The custom bed was then lined with bamboo for something different. Following the endless hours of body mods, it took nearly as long to fill, block-sand, and prep the surfaces before Rodney Hutcherson Design and Paint in Pasadena, Texas, applied the DuPont Custom Conundrum Coconut Yellow.
What really gave the Conundrum character was its final assembly. Danny Barnett and Matt Prior, two employees of Carroll Smith at his dealership at Monument Chevrolet in Pasadena, were never meant to be the final assemblers of the project. However, as the pieces were delivered from the paint shop, Danny and Matt began assembling until completion. These two guys, both of whom had never built a hot rod before, basically assembled a masterpiece.
The audio sound is headed up by a Kenwood head unit and amplifier, four 5-1/2-inch Eclipse speakers, and a pair of Rockford Fosgate 8-inch subwoofers deliver the thunder and lightning.
Opening the door exposes every admirer to an all-custom interior, featuring a one-off custom padded leather dash, with a central control panel that confines an '06 Cadillac analog clock, Vintage Air climate control, and Kenwood audio knobs. The instrumentation cluster is also from an '06 Cadillac Escalade, an ididit steering column is capped with a custom one-off steering wheel, and the center console houses the Tremec six-speed spherical swiss-cheese shifter and Air Ride pneumatic suspension controls. The custom stitch work was all done by Gabe's Upholstery in San Bernardino, California. The immaculate custom-made low back bucket seats were covered with pond-scum yellow leather, while the dash and center console was wrapped in chocolate brown leather.
This one-of-a-kind masterpiece was a Great Eight finalist for the prestigious Ridler Award at the '07 Detroit AutoRama. And remember, this is Carroll's driver!
Remote actuators activate the hood and tonneau cover for hands-free engine and bed access.
Lifting the custom tonneau cover exposes the bamboo-lined bed with polished stainless stri
From a worm's eye view we can checkout the Corvette Tremec transaxle and Z06 rear suspensi