• 2007 Chevy Silverado Removing Front Grill
    While Frankie was aligning the truck and trimming the air dam for clearance, the work on the grille began. The instructions from Carriage Works said that the factory grille just pulled off; but a set of pliers helped to remove the grille without much force.
    2007 Chevy Silverado Removing Front Grill
    While Frankie was aligning the truck and trimming the air dam for clearance, the work on t
  • 2007 Chevy Silverado Sawing Out Grid
    Blue masking tape protected the chromed, plastic grille while a reciprocating saw cut out the plastic grid.
    2007 Chevy Silverado Sawing Out Grid
    Blue masking tape protected the chromed, plastic grille while a reciprocating saw cut out
  • 2007 Chevy Silverado Dremel Tool
    A Dremel tool with an abrasive drum cleaned up the cuts.
  • 2007 Chevy Silverado Install Upper Grill
    Aluminum brackets, bolts, and Nyloks, made the upper grille installation a snap.
  • 2007 Chevy Silverado Lower Grill Install
    The lower grille proved more difficult. First, the tow hooks were removed. Blue masking tape helped to mark the location for the 13/64-inch holes that were drilled. Plastic rivets made for a clean final look, but they were difficult to insert. Don't rush the install and double-check all of your measurements, then things will go fine.
    2007 Chevy Silverado Lower Grill Install
    The lower grille proved more difficult. First, the tow hooks were removed. Blue masking ta
  • 2007 Chevy Silverado Pro Comp Wheels
    Pro Comp's new Series 6002 wheels are 9-inches wide and 35x12.5R20 Xtreme M/T tires gave the truck the look we were after.
    2007 Chevy Silverado Pro Comp Wheels
    Pro Comp's new Series 6002 wheels are 9-inches wide and 35x12.5R20 Xtreme M/T tires gave t