Fantastic 2007 Toyota Tacoma - Towering Toyota

Dale had some help in mounting the sway bar, which was dropped down with spacers to properly align with the new spindles. The end links were then secured to the spindle.	Things were quickly going back together at this point, which is when Dale reinstalled the brake rotors and calipers.
Pro Comp's lift spindles also made provisions for the ABS sensors. Here, Dale installed the sensor and checked the wiring to keep it away from moving parts.	Drop down brackets were then installed to help the brake lines reach the caliper.
Dale knew that aligning the Tacoma with the lift was going to be a problem, so per the Pro Comp instructions, he trimmed 3/8-inch off the tie rod end, then secured it to the lift spindle.	Buttoned up, the front suspension looked ready for the trails with its new lift spindles and big coilovers.
Finishing up the front, Dale installed the parallel lateral impact bars to the crossmember and rear drop down bracket.	Looking underneath the Tacoma, serious hardware means serious fun to us.
Out back, the factory U-bolts were removed, the leaf spring pack was clamped, and the retaining bolt was removed.

Prev | 1 | 2 | 3 | 4 | 5 | 6 | Next