|
|
 Next up, the interior lights...  Next up, the interior lights were disconnected, then the headliner was pulled free.  It was then tilted on its...  It was then tilted on its side and slid out of the truck.  The bracket holding the sunroof...  The bracket holding the sunroof glass motor was unbolted and the sliding cover was slid out of the back.  With the headliner on a table...  With the headliner on a table covered in foam, it received some compressed air to clean any loose dirt and debris.  Black suede was then stretched...  Black suede was then stretched across the headliner to get the exact dimensions.  Glue was sprayed to both the...  Glue was sprayed to both the factory headliner and the back side of the suede.  It was then stretched tight...  It was then stretched tight at all sides and patted down.  Each edge was firmly wrapped...  Each edge was firmly wrapped to get the suede to stretch as much as possible.  This flat, metal edge was...  This flat, metal edge was used to press the suede down on the back side of the headliner. Using this method helped the glue to grip the materials tightly.
|