• 2007 Chevy Silverado Axles Slid Out
    The rear diff cover was removed to gain access to the axle lock pin. Once it was removed, the axles were slid out.
    2007 Chevy Silverado Axles Slid Out
    The rear diff cover was removed to gain access to the axle lock pin. Once it was removed,
  • 2007 Chevy Silverado Disassemble Old Brake
    Next, the old drum brake was disassembled.
  • 2007 Chevy Silverado Four Bolt Pattern
    This is the basic four-bolt pattern for the axle. Baer uses this to bolt their new disc with parking brake assembly.
    2007 Chevy Silverado Four Bolt Pattern
    This is the basic four-bolt pattern for the axle. Baer uses this to bolt their new disc wi
  • 2007 Chevy Silverado Bolts Torqued To Specs
    On went the parking brake assembly, then the four bolts were torqued to specs.
  • 2007 Chevy Silverado Special Bracket
    A special bracket was secured to the axle in order to mount the caliper.
  • 2007 Chevy Silverado Factory Axles Inserted
    The factory axles were then inserted.
  • 2007 Chevy Silverado Baer Rotors Over Studs
    Next, Baer rotors were slid over the studs.
  • 2007 Chevy Silverado Baer Calipers Installed
    The six-piston Baer calipers were then installed.
  • 2007 Chevy Silverado Parking Brake Cables Installed
    A similar line block was used for the rear brake hoses and then the parking brake cables were installed.
    2007 Chevy Silverado Parking Brake Cables Installed
    A similar line block was used for the rear brake hoses and then the parking brake cables w
Enjoyed this Post? Subscribe to our RSS Feed, or use your favorite social media to recommend us to friends and colleagues!
stumble upon rss