 An Allen wrench was used to...  An Allen wrench was used to secure the heavy duty, power cable from the vehicle's battery. The head unit RCA connector leads were linked into the MTX Thunder 300 RCA connector cables, then plugged into the appropriate MTX Thunder 300 terminals. |  The MTX Thunder 300 amp was...  The MTX Thunder 300 amp was secured underneath the driver seat using four #6 self-tapping screws. |  To send power to the MTX Thunder...  To send power to the MTX Thunder 300 amplifier a MAD Audio 4 gauge 2-channel 1,400-Watt ECHO installation kit was used. The fuse holder was mounted onto the driver side fender flange. The power lead eye-connector was connected directly to the power cable that was connected to the positive battery post. |
YOUR QUESTIONS ANSWERED
Degree of Difficulty: Intermediate
Time spent working: 51/2 hours
PARTS LIST:
MTX 1x300 watt XThunder amp - $199.99 ea.
JL Subwoofers 10-inch W1 Series 4-ohm SVC 300 - $119.99 ea. (x2)
MAD Audio 4Ga 2- Chnl. 1400 Watt Auto Sound Installation Kit $49.99 ea.
Total: $489.96 (not including tax and labor)
TOOLS USED:
Power drill, utility knife, wire strippers, crimping pliers, Philips screwdriver, table saw, jigsaw, measuring tape, pneumatic stable gun, 1010 Adhesive spray, pneumatic paint spray gun and pot, small pneumatic jigsaw, assorted Allen wrenches