2005 Chevy Silverado Crew Cab Buildup - Leveling The Playing Field

Raul carefully removed the block from the torsion bar crossmember.

The torsion bar was removed from the key and torsion bar crossmember. The key was then lowered from the torsion bar crossmember.

Showing the old and the new. The new Pro Comp key is re-indexed to allow for proper torsion bar pre load and final load to raise the front end to desired leveling ride height. Also, the Pro Comp leveling kit included taller front shock mounting brackets.

Raul was then able to install the new Pro Comp 2-inch shock mounting bracket to compensate for the front end's increased ride height.

The new re-indexed Pro Comp torsion bar key was slid up into position inside the torsion bar crossmember.

Raul then slid the factory torsion bar into the new Pro Comp torsion bar key.

Raul used the special torsion key tool to set the torsion bar pre-load.

The block was carefully installed into the torsion bar crossmember.

The new Pro Comp torsion bar adjusting bolt was inserted and cranked up. This raised the front end.