|
|
 Curt removed the door seals,...  Curt removed the door seals, then wadded up the carpet and took it out the driver door.  With the factory carpet removed,...  With the factory carpet removed, the new- appearing bare metal cab floor was prime for a layer of R-Blox sound deadening material.  Curt cut and peeled back the...  Curt cut and peeled back the adhesive protective backing of the R-Blox material. The pieces of R-Blox were simply applied to the bare metal cab floor.  A hand roller was used to...  A hand roller was used to insure optimum adhesion of the R-Blox on flat and contoured floor panels.  After the entire cab floor...  After the entire cab floor was covered with R-Blox sound deadening material, it was time for the molded carpet to be laid.  Curt spread the new Trim Parts...  Curt spread the new Trim Parts molded carpet working with his hands to form the premolded carpet to the floor contour.  Tucking tools were used to...  Tucking tools were used to tuck the carpet under the cab moldings.  An electric drill was fitted...  An electric drill was fitted with a Phillips bit to insert the screws securing the new carpet under the door seal plates.  Curt carefully removed the...  Curt carefully removed the factory headliner that will be replaced with a new molded headliner complete with sunvisors and hardware.  The bare roof awaits its new...  The bare roof awaits its new headliner and sunvisors. Manuel inserted the new hardware to secure the sunvisors to the headliner.  The new Cerullo Performance...  The new Cerullo Performance sport truck bucket seats feature a center console ABS tray, with drink holders and upholstered armrests.  The Cerullo Performance sport...  The Cerullo Performance sport truck bucket seats share a middle jump seat. By flipping back the center console, an upholstered back support locks into place for a third person.
|