2011 Ford F250 - Recon Lights - Superior Super Duty

13. Next, we upgraded the factory lights with a set of Recon LED lights. To remove the factory lights, we had to remove two 8mm bolts. With these removed, the lights pop out with a little bit of persuasion.
13. Next, we upgraded the factory lights with a set of Recon LED lights. To remove the fac
14. The new lights from Recon looked good and were very simple to install.
15. This set of Recon lights has a wiring harness with a blade on the end that plugs into the light bulb socket.
15. This set of Recon lights has a wiring harness with a blade on the end that plugs into

16. The backup light is removed from the old light housing and inserted into the new one.
17. Next, we moved to the third brake light. Two Phillips screws were removed and the wiring harness was unplugged and the light was boxed up.
17. Next, we moved to the third brake light. Two Phillips screws were removed and the wiri
18. The new third brake light was clear and much brighter than the factory one. It also looked much better.
18. The new third brake light was clear and much brighter than the factory one. It also lo

19. Installation could not be any easier as the wiring harness simply plugs into the new light.
19. Installation could not be any easier as the wiring harness simply plugs into the new l
20. After five minutes, the lights were upgraded and now trailing drivers will know when we put on our brakes.
20. After five minutes, the lights were upgraded and now trailing drivers will know when w