Ad Radar
Subscribe
Subscribe
Truckin Magazine
> > >
Photo 4
524 comments
Hansie Boon
Hansie Boon

The article is really nice. The IT industry consumes lot of electricity, so save it by using low power display, paper wastage is on a large quantity so reduce it or recycle the wastage papers. Following few such may lead finally into a green office.

 Hansie @    http://unitedfilter.com/blog/


petergomez
petergomez

This is probably a good time to check the form factor of the replacement battery and its polarity in its mount  The battery is mounted in a black cradle, but this doesn’t retain it; it is kept in place simply by the two tabs that go through the circuit board, are bent back flush with the board and are soldered in place on the reverse.

peterhttps://www.yourmechanic.com/

petergomez
petergomez

I think the concept is good "to be green" in general. The process in which some of the compents that make computers and monitors themselves are being made is not necessarily Eco friendly. As humans we create waste everyday and with computing the type of waste has changed

 Schultzy @  http://unitedfilter.com/

Casey Macy Jones
Casey Macy Jones

Thanks for the information on how to strengthen the diesel oil filter.  I will have to try that on my truck.  Gotta take care of the truck and keep it running, otherwise I will be out of work.  My job involves a lot of heavy towing and that really stresses the engine.  If the oil isn't filtering right, I  would be in a lot of trouble.

http://wofsco.com 

petergomez
petergomez

Keeping tropical freshwater fish is not as difficult as you may think. As with any tank, the fish are reliant on the maintenance of good water quality, the correct temperature & sufficient aeration. These things can all be checked regularly once the tank is up & running so the most important thing is getting your setup right from the beginning


Peter 
http://unitedfilter.com/index.php/default/shipping

schultzybeckett
schultzybeckett

A good  oil  filter not only  is  helpful in  increasing   the efficiency  of the  engine  but  also  saves one from  the hassles  of  maintenance otherwise keeping vehicle  in   well tuned condition  could  be  challenging  task.

Schultzy @ http://unitedfilter.com/blog/

Michael Stitt Jensen
Michael Stitt Jensen

I used to work for EDGE Products & I've seen each truck pull a lot of HP's stock, and a heck of a lot more once the chip was installed. If you want lots of hp & torque, you're going to have to pay for the mods somehow. & yes, I've even seen them all burn up from being pushed to hard for what was in it at stock. You want performance?, upgrade!

Justin Const
Justin Const

Carl Immormino ...you swap it out for a 7.3 !!!

Phillip Douglas
Phillip Douglas

8 more head studs per head. A bullet proof high pressure oil pump. Clean oil. No egr. External air cooled oil cooler( do away with water cooled oil coolers or ask cummins how to build one). An I would do away with the two piece head/ rocker box. The 6.0 makes a lot of power but u can't trust them.

Johnny Lee
Johnny Lee

Don't fix something that ain't broken.

Dominic Dagenais
Dominic Dagenais

Maintenance and Cetane booster. That´s it. Had alot of those on my fleet and never blown heads on them.

Ivan Raul Haros Flores
Ivan Raul Haros Flores

Once u make a 6.0l bulletproof than it will spank all the other diesels, it was made for hard work...

Adam Anderson
Adam Anderson

Weld the egr cooler shut. That become unconditionally reliable. I built one for a shop that had over 800 horses and all we did was add a chip and weld the egr cooler shut so the coolant bypasses

Jason Puzio
Jason Puzio

Egr delete high pressure fuel spring head studs and 4 inch exhaust and you have one tuff 6.0

Roy Garcia
Roy Garcia

Burning it down to the frame and then burring it about 20 feet in the ground

Shane Epps
Shane Epps

Just get a worn Cummings engine that will do just fine.

Aric Pearson
Aric Pearson

Melt the block and heads down into ingots and send them to wherever they cast cummins blocks and heads....

Pat Keegan
Pat Keegan

I was once told I wouldnt amount to anything based upon the truck I drive. Was laughing too hard to express the joys of paid in full.

Lulu Carrillo
Lulu Carrillo

K tengan todos una feliz nabidad y un prospero año nuevo al lado de sus fam.amigos un abraso muy fuerte para todos

Aaron Jessica Teague
Aaron Jessica Teague

Cummings motor with a ram head on front instead of a ford symbol they circled the problem

Tiago Fontes
Tiago Fontes

trabalho duro desses caras.... essas maquinas dão trabalho.....ja arrumei alguma delas....