
Here are the details on the hood of the finished project. Note the factory, black basecoat sandwiched by the dark gray and silver blend that also colors the abstract Thor logo. | 
A better view of the graphics on the side of the truck. Black and gray never looked so good, right? |

Here are close-ups of the Thor graphics. The first is painted on the C-pillars, while the second is on the doors. |  |

Toyota's logo is faded into the sides of the truck bed in an understated, but still obvious, presentation. | 
Here are more tailgate details. |
From The Driver Seat
This was a routine project for Kelly & Son. It was amazing to see what could be done with gray, silver, and black. Mitch applied multiple layers of different shades, while checking them as he went along in order to manipulate the colors. If you know what you are doing, we suppose a paintjob like this isn't horribly difficult to execute, and fewer colors and less intricate graphics made the design of this paintjob easier. It's a great project for a shop that is on the go.
YOUR QUESTIONS ANSWERED
| Time Spent Working: | 20 hours |
| Mechanical Difficulty | Advanced |
Tools Used: A paint booth, a Sata spray gun, Kaeser air compressor for the spray gun, respirator masks, Quickcut sanders, 600-grit paper, Scotch-Brite pads, rolls of 18-inch-wide paper, masking tape, and handtools.
Coatings Used:PPG Vibrance Silver Star Basecoat 908418PPG Vibrance Crystal Black 908419PPG 41010 ClearPPG 3520 Hardener
Total Cost: | $6,500 |
| (paint and labor) |