13. The Maxx Cam 2 for all fullsize torsion bar-equipped GM 1/2-, 3/4-, and 1-ton trucks and SUVs from '88 to '08. It's capable of delivering as much as 3 inches of lift or drop, without any degradation in handling or ride quality. This is the simple solution to adjusting ride height. Investment cast to exacting standards, and constructed entirely from 4140 heat-treated alloy steel, Maxx Cam 2's strength and durability exceed that of even the toughest one-piece OEM torsion bar lever. Perfect for truck-owners in need of a practical suspension solution, the Maxx Cam 2 has a variety of uses, which range from a more-aggressive appearance, to a bolstered front-end support for accessories such as plows, brush guards, and heavy winch bumpers. MSRP $249. For additional information, call (888) 629-9226, or visit www.suspensionmaxx.com.
14. We know you probably don't check your tire pressure as often as you should, because we don't, either; and most of the gauges we have don't make it easy. The Oasis tire gauge is available in three ranges: 0-30 psi, 0-60 psi and 0-100 psi, and includes an accurate 2-1/2-inch class-A gauge, a super-chuck, lever-operated inflator, a 3-foot hose and a 1/4-inch NPTF fitting for your air source, in a cordura carrying case. This easy-to-use product accurately reads tire pressure when the inflation lever is released. MSRP $59.95. For more information, contact Oasis Manufacturing at (949) 768-4311, or visit www.oasismfg.com.
15. Cleantools has a whole stable full of car care products, from wheel and tire brushes to its microfiber drying towel, the Glosser, which comes with wax already applied; to the Absorber, an artificial chamois that soaks up water like nothing else. We've used them to dry a truck, and they're one of the fastest way to dry a vehicle-short of using a jet engine. Perfect as a stocking stuffer, Cleantools start at about $10. For more information, visit www.cleantools.net.
16. Gibson Performance has just introduced an exhaust tip for diesel trucks with an oversized 6-inch equilateral triangle design. This tip has been engineered not only to deliver looks like you've never seen before, but it also allows for cooler surface temps, as compared to traditional tip designs. The Gibson Tri-Flow Tip features rear breathe-ability ports that pull exhaust gasses through the tip, accelerating cooling. The Gibson Tri-Flow Tip is constructed of T-304 High Polished Stainless Steel with an integrated clamp-on design. MSRP $125. For more information, contact Gibson at (800) 528-3044, or visit www.gibsonperformance.com.