Chevy C10 Short Bed - Bed Bobbing Basics
If the cab is not removed, the rear body mount bolts will need to be removed, and the front bolts loosened, so the cab can be lifted high enough to slide the crossmember under the cab. In reality, we removed a bit more than 12 inches from the front section on the bed. We opted for 13-1/2 inches, just to be different. The bottom of the cab has a pocket for the crossmember, but our crossmember was going to slide forward a bit more than stock, so we trimmed the top of the crossmember for the additional 1-1/2 inches we needed to get the wheels centered in the wheelwells. View Related Article
|
|