Chevy C10 Short Bed - Bed Bobbing Basics
Once again, a thick piece of angle iron was attached to the top of the framerail, then a second clamp in the frames webbing secured the mating ends together. A couple measurements ensured the frame was square and equal. Next, both sides of the framerails were clamped together with a small gap in between the mating surfaces. With the frame squared and locked down with clamps, we welded the frame section together. The 12-inch section of removed frame was turned over and laid over the freshly welded frame sections. The channels were facing one another, and welded, which provided added strength over the welded frame. View Related Article
|
|