|
|
 Moving to the third brake...  Moving to the third brake light, the factory red lens was removed by loosening the two Philips screws.  We then came to our one and...  We then came to our one and only problem, the factory third brake light was held on by double-sided tape and two bolts only accessible through the rear headliner. We opted to break loose the tape and then use force. It worked.  We then came to our one and...  We then came to our one and only problem, the factory third brake light was held on by double-sided tape and two bolts only accessible through the rear headliner. We opted to break loose the tape and then use force. It worked.  After cleaning up the old...  After cleaning up the old glue, the cab was ready to accept the new light from ANZO.  It was simply a matter of...  It was simply a matter of plug and play for the ANZO LED light.  Using the supplied tape, screws...  Using the supplied tape, screws and hardware, the light went in easily.  At night, the LEDs were u...  At night, the LEDs were ultra-bright.  We were now ready for the...  We were now ready for the new ICCE OTR wheels and Continental CrossContact tires. Check out the great-looking combo beside the stock 16-inch wheel.  Slapping the wheels on and...  Slapping the wheels on and torquing them down to the proper specs was a breeze and all we needed to do was clean everything up.  Bolted on and ready to rock,...  Bolted on and ready to rock, the 20x9-inch ICCE OTR wheels and Continental 275/45R20 tires looked awesome and provided extra grip and better cornering.  A quick trip to the carwash...  A quick trip to the carwash using our Mothers Polishes car care products had our Tacoma looking its best.
|