To deliver those high-pitch...
To deliver those high-pitch tones, a pair of Polk tweeters were popped into their separate pods.
Cory, airbrush artist extraordinaire, applied multi-coats of primer and sealer. The interior components were then sprayed with House of Kolor White basecoat. Cory laid down a couple of coats of House of Kolor Kandy Marine Blue, then airbrushed a continuous black/white water line that interlinked every interior panel and dash. This was finished by the panels and dash with floating bubbles.
The audio sound and visual components were interlinked with each other, which made for an insane entertainment system.
To complete this concert-hall chamber, the factory headliner was recovered in dark-gray suede. The four factory bucket seats were covered with high-quality Katzkin Tuscan leather.
If you think the interior components were amazing, then you should hear the thunderous clarity and entertaining visual effects. It was truly a ka-boom! experience.
The ATC monitor screen was...
The ATC monitor screen was removed from its housing, then installed into the backside of the door panel.
After the Polk speakers and...
After the Polk speakers and ATC monitor had been installed, we could see the installation from the backside of the front door panel.
Here's a view of the front...
Here's a view of the front door panel from its more-attractive side.
The true talents of Danny's...
The true talents of Danny's creative mind are expressed with this center console subwoofer enclosure that was constructed from medium density fiberboard (MDF), then wrapped in a blended cotton-polyester material, that was saturated with fiberglass resin. The subwoofer enclosure body and pods were shaped by applying body filler, then sanding them smooth to its final shape, and finally sprayed with a sealer primer basecoat.
Airbrush artist sensation...
Airbrush artist sensation Cory Saint Clair laid down some awesome water-line highlights.