To gain access to these screws,...
To gain access to these screws, the driver's side coat hanger was unscrewed...
...and the driver side rear...
...and the driver side rear pillar panel was gently pulled free to let the headliner down just enough to fit the nut driver behind it.
With an easy push outward...
With an easy push outward and after disconnecting the interior dome light connection, the third light housing was removed from the exterior. The Anzo unit on the right has wiring to the dome light already in tact.
The wiring was fed inside...
The wiring was fed inside the cab, the third brake light housing was secured, and the headliner was buttoned back up. Just like that, our lighting upgrade was complete.
Time Spent Working: 1 Hour
Mechanical difficulty: Beginner
Tools Used:
Phillips screwdriver and 7mm nut driver
Parts Used:
Anzo USA LED taillights 311013 $206.63
Anzo USA LED third brake light 531020 $74.56
Total: $281.19 (tax not included)
Prices from gcustoms.com