2007 Chevrolet Tahoe - Fantastic Four

	Here, we laid out the MagnaFlow kit for you to see. It's a straightforward system.
The muffler and inlet pipe were mated loosely.	The extension pipe was slipped onto the muffler loosely, and hung from the frame. Then the tailpipe, with a polished tip already welded on from the factory, was loosely attached to the extension.
All of the pipes were clamped together, no welding was required.	The Ground Force suspension kit is very simple: coils, rear shocks, bumpstops, and sway bar spacers.
After the wheels and tires were removed, the front stock coilovers were dropped from their places.	The Ground Force coils replaced the factory springs in the coilover setup and were lifted into position and bolted into place.
	The factory rear springs were removed and the factory bumpstops were replaced.
The pads were taken from the ends of the stock springs. Then, we put on the Ground Force springs, and the springs were installed into the factory location between the frame and the rear axle.

Prev | 1 | 2 | 3 | Next