Next, J.C. attached the bracket...
Next, J.C. attached the bracket on the intercooler reservoir tank before installation. The reservoir was attached to the secondary battery bracket just in front of the fuse box.
After the hoses from the back...
After the hoses from the back of the supercharger manifold and from the newly installed water pump were connected to the intercooler reservoir tank, J.C. popped open the fuse cover, tapped into an ignition power source and mounted the MagnaVolt unit atop the fuse cover using hook and loop tape.
A dose of 50 percent coolant...
A dose of 50 percent coolant and 50 percent deionized water was added to the system and was cycled for a few minutes before...
...the installation was considered...
...the installation was considered a done deal. J.C. retraced his steps and consulted the installation manual to make sure each connection was correct and there was no step overlooked.
Time Spent Working: 9 hours
(due to recovering steps needing different parts)
Degree Of Difficulty: Intermediate
Tools Needed:
Multiple metric sockets, pliers, flat screwdriver, drain pan, lb-ft torque wrench, wire crimpers and wire connectors.
Parts Used:
Prototype MagnaCharger Radix Intercooled supercharger system $6,695