Last month, Project Blue Bomber was at Stillen’s performance center, receiving an Edelbrock E-Force supercharging system for the Silverado’s 4.8L engine. Strapped down to Stillen’s chassis dyno, the 2011 Silverado spun the rollers to the tune of 374.18 hp and 366.36 lb-ft of torque. The one caveat was those numbers were pushed through the original exhaust system. We made zero supporting modifications to allow the engine to properly exhale all the air being forced into it. This month, we chose to change that and the power results were better than expected.
We began by exchanging the factory exhaust manifolds for long-tube headers from Dynatech. GM has come a long way in development of its LS-series manifolds, and for most applications they work amazingly well. We’re power junkies at heart and Dynatech’s SuperMAXX headers and Y-pipe system offered us the fix we needed. We chose the intermediate piping with the cats to keep the exhaust noise down to a reasonable level and not pump carcinogens into our already polluted air. The goal of Blue Bomber is, after all, to build a street-driven truck that can hit the track when the desire arises.
Once the exhaust was expelled from the converters, we needed an after-cat system to collect, silence, and aim the spent fumes away from the truck. MagnaFlow’s Performance Exhaust system fit the bill perfectly. Once Stillen tuned the ECU parameters, our Silverado was lighting up the tires with ease. More power, better sound, and an easy install made this month’s upgrade money well spent.