2003 Hummer H2 Airbag Suspension - Hammering A Hummer

Some minimal grinding was done on the front inner wheel well to allow proper clearance for the No Limit Engineering front shock mounting brackets.	No Limit Engineering CAD upper and lower front shock mounting brackets and Air Ride Technologies front ShockWave 1009 air spring bellows will support and adjust the ride height of the front suspension.
The No Limit Engineering upper front shock mount brackets are designed to mount flush on the top and side of the frame rails for added strength and stability.	The No Limit Engineering upper front shock mount was located and then welded in place using stitch welds that will produce minimal heat into the frame rails.
Observing the No Limit Engineering upper front shock mount brackets, you can notice the superior fitment and triangulated strength that enhances the front suspension components.	The No Limit Engineering lower shock mount bracket was designed with strength and durability in mind. It is located on the lower control arm and then bolted in place.
The Air Ride Technologies' ShockWave 1000 bellow shock is guided through the upper control arm. Rob then aligned and secured the ShockWave with supplied hardware.
A clean, simple installation of both No Limit Engineering's front mounting brackets and Air Ride Technologies' ShockWave 1000 bellow shocks.