The upper control-arm cross shaft was slipped over the front upper-suspension pickup mounting points. |
Next, camber shims were inserted between the framerail and the upper control-arm cross shaft. |
The upper control-arm was secured to the framerail. |
For this first segment of '67 Nightmare's buildup, we followed along as Bill, from Bonfire Racing, installed a CPP Grand Slam front suspension and CPP Big Bar rear-suspension kit.
| YOUR QUESTIONS ANSWERED |
| Time Spent Working: | Approximately 7 hours |
| Degree of Difficulty: | Intermediate |
| (Bolting on front and rear suspension components) |
| Parts List | Part Number | Price |
| Classic Performance Products (CPP) |
| Front suspension: |
| CPP Grand Slam Suspension Kit | PN 6772GSK-5D | $1,299 |
| Parts List | Part Number | Price |
| All Necessary Hardware |
| QA1 Shocks gas filled front | PN STS1572PX | $200 each |
| Rear Suspension: |
| CPP Big Tube trailing arm kit | PN 72TADLK | $789 |
| CPP Rear C-Notch | PN 6372CNK | $129 |
| CPP Shock Relocation kit | PN6372SRK | $59 |
| CPP Deluxe Trac Bar | PN 6572DTBK | $109 |
| CPP U-bolts | PN 6072RUBS | $29 |
| CPP Rear Disc Brake Kit | PN 6772RWBK-5E | $599 |
| QA1 Shocks gas filled rear | PN STS250PX | $200 each |
| LPW Rearend housing cover | PN 301-12T | $167 |
| Crossmembers: |
| CPP GM Transmission crossmember | PN CP9427 | $79 |
| CPP GM Drop-center crossmember | PN 6372LDL | $199 |
| Tubular SB motor mount | PN 6372MP-T | $129 |
| LS1 Engine mount brackets | PN CPLS1K | $69 |
| Total Cost: | $4,356 |
| (Not including tax, installation labor, sand blasting, or powdercoating) |