2008 GMC Yukon Buildup - FantasticSix

Wheels of choice for the Yukon were DUB Bully 24x10-inch chrome hoops with Hankook Ventus 295/35R24 tires. The tires will keep the wheels protected and maximize grip for the new lowered suspension. The unique size will keep any pieces of the fenders from rubbing and still provide a ride that isn't too harsh.	After having the wheels and tires mounted and balanced, the combo looked awesome on the truck. Now we just needed an alignment.
Moving on to the exhaust, the stainless pipes and muffler were removed from the MagnaFlow box. The kit features a polished muffler and polished oval tip.	After freeing the exhaust from the OE rubber grommets, a Sawzall was used to cut the pipe into two pieces, allowing it to be removed around the axle.
Ben installed the head pipe first. Notice the flexible bend joint, just like the factory exhaust was equipped with.	Next up, the polished MagnaFlow exhaust was slipped into place.
With a jackstand supporting the muffler, the end pipe and tip were slid over the axle and into position. The supplied clamps were then snugged down.	Helping more air get into the 5.3L V-8 was an Airaid intake. It's worth noting, this kit is 50-state CARB smog legal.
It was a simple matter of loosening the hose clamps to the airbox and throttle-body to remove the intake tube. Notice the plastic engine cover was also removed.

Prev | 1 | 2 | 3 | 4 | 5 | 6 | 7 | Next