1956 Chevy Stepside Truck Buildup - Building One For Dad

Jacquez installed the Wilwood rear cross-drilled brake rotor hat over the Wilwood e-bake assembly.

The rear Wilwood polished disc brake four-piston caliper was mounted to the mounting bracket.

Here, you can see a close-up of the final rear Wilwood disc brake assembly.

To eliminate any lateral movement of the rearend assembly, Jacquez installed the Panhard bar.

A gopher's eye view of the Currie rearend, Heidts rear adjustable coilover shocks, and Wilwood brakes assembled.

A Heidts SuperRide II front crossmember was to receive the Heidts SuperRide IFS independent front suspension.

After assembling the upper and lower control arms and spindle, Arturo installed the Heidts coilover shock.

Arturo packed the wheel bearings then slid the Wilwood front cross-drilled rotor and hub onto the Heidts front spindle.

After threading the castle nut onto the spindle securing the hub and rotor, Arturo inserted the cotter pin. The Wilwood polished four-piston caliper was then mounted onto the front brake brackets.

An overall view of the Heidts SuperRide front suspension and Wilwood disc brakes.

Arturo installed the Heidts front sway bar that will help eliminate body roll during cornering.

The Heidts front sway bar was secured to the endlink heim and secured to the lower front shock mounting bracket.